INSTRUCTIONS FOR OUR PRODUCTS
Directions: Unlike the lights of another generation, these new lights have more bells and whistles. Some have different modes and charging ports that may be a little different than what most of us are familiar with. Please take a moment and read over the list and familiarize yourself with how they work.
1. Lights are shipped with a tab over the battery to prevent discharging during shipment.
2. Unscrew back cap and remove tab - reinsert battery and screw cap back tightly.
3. On-Off - Press button down firmly to activate light. You will hear a “click”. This button is located at the rear of the light or on the side
depending on your model.
4. Modes - After turning on the light, the different modes can be activated by lightly touching the on-off button without “clicking”.
Press the button repeatedly to change modes.
5. Pressing down firmly with a click will deactivate the light.
6. Push-Pull Zoom Feature - All of our zoom models, except the GPTWIST, have this feature. Point the light at the area you wish to see,
telescope the head of the light by grasping the bell (lens housing) and pushing the head or bell away from you. This narrows the
beam. Pull the bell rearward and this widens the beam.
7. GPTWIST - The zoom feature for this light is located on the bell of the light. The metal ring on the bell can be twisted to the right or
left to narrow or widen the beam.
8. Charging The Light - Our rechargeable lights, with the exception of the GPOPS light, comes with either a wall, car or USB charger.
Remove the rechargeable batteries, place in charger and plug the charger into the wall.
9. GPLAW and GP248 Lights - These lights come with three chargers. Using the USB or car charger, locate the port located directly
behind the head or bell of the light. The port is covered with a rubber strip to keep dirt out of the port. Plug the charger into the port.
If a wall socket is available, remove the battery from the rear of the light, and insert the battery into the charger.
10. GPOPS - To charge this light, grasp the bell or head of the light and unscrew the body of the light in a counter clockwise motion.
Turn the body until a hole or port appears. Plug the charger into the port and charge the light. After charging, screw the body back
into place and your ready to go.
Thanks,
The Grayhawk Team
1. Lights are shipped with a tab over the battery to prevent discharging during shipment.
2. Unscrew back cap and remove tab - reinsert battery and screw cap back tightly.
3. On-Off - Press button down firmly to activate light. You will hear a “click”. This button is located at the rear of the light or on the side
depending on your model.
4. Modes - After turning on the light, the different modes can be activated by lightly touching the on-off button without “clicking”.
Press the button repeatedly to change modes.
5. Pressing down firmly with a click will deactivate the light.
6. Push-Pull Zoom Feature - All of our zoom models, except the GPTWIST, have this feature. Point the light at the area you wish to see,
telescope the head of the light by grasping the bell (lens housing) and pushing the head or bell away from you. This narrows the
beam. Pull the bell rearward and this widens the beam.
7. GPTWIST - The zoom feature for this light is located on the bell of the light. The metal ring on the bell can be twisted to the right or
left to narrow or widen the beam.
8. Charging The Light - Our rechargeable lights, with the exception of the GPOPS light, comes with either a wall, car or USB charger.
Remove the rechargeable batteries, place in charger and plug the charger into the wall.
9. GPLAW and GP248 Lights - These lights come with three chargers. Using the USB or car charger, locate the port located directly
behind the head or bell of the light. The port is covered with a rubber strip to keep dirt out of the port. Plug the charger into the port.
If a wall socket is available, remove the battery from the rear of the light, and insert the battery into the charger.
10. GPOPS - To charge this light, grasp the bell or head of the light and unscrew the body of the light in a counter clockwise motion.
Turn the body until a hole or port appears. Plug the charger into the port and charge the light. After charging, screw the body back
into place and your ready to go.
Thanks,
The Grayhawk Team